Single Use Featured Solutions
-
Datasheet: Oxygen Ingress Measurement
12/12/2008
A new non-invasive and non-destructive fiber optic oxygen meter determines oxygen permeability of plastic bottles and containers. Trace oxygen concentrations inside the package are measured.
-
Datasheet: SDR- SensorDish Reader
12/12/2008
The SDR SensorDish® Reader is a small 24-channel reader for non-invasive detection of oxygen and pH in multidishes (SensorDishes®). These contain a sensor spot at the bottom of each well.
-
Brochure: SDR- SensorDish Reader
12/12/2008
The SDR SensorDish® Reader is a small 24-channel reader for non-invasive detection of oxygen and pH in multidishes (SensorDishes®). These contain a sensor spot at the bottom of each well.
-
Datasheet: Microx TX3 And Microx TX3-Trace Transmitters
12/12/2008
The Microx TX3 and Microx TX3-trace are precise single-channel, temperature compensated oxygen meters. They are used with oxygen microsensors based on a 140 µm optical fiber.
-
Datasheet: OXY-4/10 Mini And OXY-4/10 Trace Transmitters
12/12/2008
The OXY-4 mini, OXY-10 mini, OXY-4 trace and OXY-10 trace are precise multi-channel oxygen meters. They are used with oxygen sensors based on a 2 mm optical fiber.
-
Brochure: OXY-4/10 Mini And OXY-4/10 Trace Transmitters
12/12/2008
The OXY-4 mini, OXY-10 mini, OXY-4 trace and OXY-10 trace are precise multi-channel oxygen meters. They are used with oxygen sensors based on a 2 mm optical fiber. A PC is connected to run the easy-to-use software. OXY-4 mini and OXY-10 mini are used for sensor coatings type PSt3 (0 - 100 % oxygen).
-
Brochure: pH-1/4/10 Mini Transmitters
12/12/2008
The pH-mini transmitters are precise fiber optic pH meters. They are used with pH sensors based on a 2 mm optical fiber. A PC is connected to run the easy-to-use software.
-
Brochure: Fibox 3 And Fibox 3-Trace Transmitters
12/12/2008
The Fibox 3 and Fibox 3-trace are precise single-channel, temperature compensated oxygen meters. They are used with oxygen sensors based on a 2 mm optical fiber. A PC is connected to run the easy-to-use soft-ware. On top, analogue outputs and a trigger input are integrated.
-
Datasheet: Fibox 3 And Fibox 3-Trace Transmitters
12/12/2008
The Fibox 3 and Fibox 3-trace are precise single-channel, temperature compensated oxygen meters. They are used with oxygen sensors based on a 2 mm optical fiber. A PC is connected to run the easy-to-use soft-ware. On top, analogue outputs and a trigger input are integrated.
-
Brochure: Carbon Dioxide Sensors
12/12/2008
The carbon dioxide sensors measure the partial pressure of dissolved carbon dioxide. The spots are fixed on the inner surface of a glassware or transparent plastic material. The CO2 concentration can therefore be measured in a non-invasive and non-destructive manner from outside, through the wall of the vessel.
This website uses cookies to ensure you get the best experience on our website. Learn more