FEDERAL EQUIPMENT COMPANY

Federal Equipment Company is a reliable resource for biopharmaceutical equipment needs, with nearly 70 years of expertise working with manufacturers seeking to buy and sell used equipment.

We sell equipment from the leading OEM’s such as Thermo Fisher Scientific, Eppendorf, Merck Millipore, Cytiva, ABEC, Sartorius, Pall and many more.

For companies with surplus equipment, Federal Equipment Company takes away all the headaches of asset management. We bring deep knowledge of equipment values, supporting accurate appraisals, and advise you on a range of options to optimize the value you recoup. We also offer cash liquidity and fast, expert removal of individual pieces to entire lines – protecting your facility.

This activity with reputable companies gives us a continual on-hand inventory of reliable equipment manufactured by leading OEMs. Our market knowledge ensures you buy exactly what you need with fast turnaround. We also offer expert training & troubleshooting for solid dose equipment.

Bioprocess Online Landing Page

Biotechnology Equipment Landing Page

Current Bio Equipment Auctions

USED BIOPHARMA EQUIPMENT

  • Unused 3,000-liter Thermo Scientific imPULSE single-use mixer, stainless steel construction, bottom-mounted imPULSE mixing technology, jacket-heated tank, BioTitan single-use bag system, integrated pH/DO/CO₂ / temperature / weight / conductivity/pressure sensors, touchscreen e-box controls, caster base, linear scalability, 1% minimum mixing volume.

  • Unused 5,000-liter Thermo Scientific imPULSE single-use mixer, stainless steel construction, bottom-mounted imPULSE mixing technology, jacket-heated tank, BioTitan single-use bag system, integrated pH/DO/CO₂ / temperature / weight / conductivity / pressure sensors, touchscreen e-box controls, caster base, linear scalability, 1% minimum mixing volume.

  • Unused Turn-Key Modular Systems (TKMS) Tangential Flow Filtration (TFF) system. This TFF unit is designed to remove ethanol from the process stream (via diafiltration, where a buffer exchange occurs to a required number of diavolumes). The system consists of: - UF Filter: Repligen model KROSFLOW MAX X06-E100-05-N for solvent removal and buffer exchange, CIP and SIP rated, 12,000 fiber count, 128,000 square-centimeter surface area (12.8 square-meters). - Filter cartridge & housing: Allegheny Bradford Corp. Model OC-1-01-QT49394-2 Air and Clean Steam Filter, 316L SS construction, design pressure FV to 150 psig, design temperature -20 to 350F (SIP temp approx. 121C). - Feed Pump: Waukesha Cherry-Burrell model 220-U2 positive displacement pump (100 lpm min/ 600 lpm max) - GEMU, Steriflow , and PBM valves - Optek UV Analyzers (not Ex rated) - Instrumentation: Bronkhorst, Endress & Hauser, and others - Sample holder: Millipore model AT51/5-3E0 - Aflex Hose - 316L stainless steel product contact parts - Stainless steel skid frame - Built to comply with "ATEX Zone 2 II 3G Ex" standards - FAT performed still on original shipped skid from OEM.

  • Used Shimadzu X-Ray Diffractometer, model XRD-6000, 220 volt, serial# Q30344800678 CZ

  • Unused Sartorius single-use mixer, 650-liter capacity, serial# MC4349.

  • Unused PALL Life Sciences bioreactor vessel, model iCELLis 500+, part# 4415-I500V500.

  • Unused Caron CO2 incubator with touchscreen display controller, model 7401-33-1, R134A refrigerant, 115V, 60 Hz, serial# 7401-33-1-277, with Unused Caron Products condensate recirculating system, model CRSY-102-1. Water purity (measured internally): 100 to 125 K Ω/cm, water reservoir: 7 gallons (26.5 liters), serial# CRSY102-1-1240.

  • Used Cytiva XDR-500 bioreactor system, model XDR-500. Includes (2) Rosemount Analytical model 1056 dual channel intelligent transmitters and (4) peristaltic pump heads, serial# 29294331, built 2018.

  • Used GE Healthcare bioreactor, model XDR-200. Includes (2) Rosemount Analytical model 1056 dual channel intelligent transmitters and (4) peristaltic pump heads, serial# 29117980, built 2014.

  • 100 liter GE single-use mixer, model XDUO-100-T on (4) load cells. Includes Lenze variable speed controller, (2) pump heads, and Emerson model 1056 controller, serial# 29142975, built 2015.

  • Sartorius Stedim stirred single-use bioreactor touchscreen controller, model BIOSTAT CultiBag STR Plus. Includes (3) peristaltic heads, capacity up to 1,000 liters, serial# 00196/10.

  • Sartorius single-use jacketed bioreactor, model BIOSTAT Cultibag STR 200-DW. Includes Watson Marlow model 323 digital peristaltic pump, load cells with Sartorius model Midrics 1 display terminal, serial# STR 0584, built 2016, with Sartorius Stedim single-use bioreactor touchscreen controller, model BIOSTAT CultiBag STR Plus. (8) peristaltic heads, serial# 00688/16.

  • Unused GE single-use bioreactor, model XDR-50 on (3) Mettler Toledo load cells and model M400 multi-parameter process transmitter. Includes (2) Rosemount Analytical model 1056 dual channel intelligent transmitters, (4) peristaltic pump heads, and mobile touch screen control workstation, serial# XDR-8561-05-001 with GE Xcellerex bioreactor operator interface terminal, model XDR-OIT. Includes Strongarm touch screen control, serial# OIT-8561-05-001, built 2012.

  • Mobile pump system with touchscreen controller and Endress + Hauser model RSG40 memograph, Cole-Parmer model 875-2614 digital 0.5 hp MasterFlex B/T peristaltic pump.

  • Thermo Scientific large-capacity reach-in CO2 incubator, model 3950, ambient +5 to 60 deg C, 29 cu.ft., serial# 49341-382. Note: front glass door needs replacement.

  • Unused Sartorius single-use mixer, 1,000-liter capacity, serial# MC4609.

  • Unused Sartorius single-use mixer, 650-liter capacity, serial# MC4613.

  • 1,000 liter Thermo Fisher Scientific single-use mixer with SEW-Eurodrive 5 hp mix motor on (3) Mettler Toledo load cells, part# IM1918, serial# H18378-01, built 2019.

  • Used 50 liter Pope bioreactor, 316L stainless steel construction, approximately 16" diameter x 18" straight side, removable dish top, dish bottom, rated 100 psi and full vacuum at 350 f internal, jacketed for 100 psi at 350 f, top mounted .25 DC agitator drive, (4) baffles, mounted on cart with lift lift assist, serial# 140243-4-1, built 2006.

  • Used Beckman Avanti 30 refrigerated centrifuge, 30,000 RPM, 208 volt, serial# CGE98C08.

  • Used 500 liter Thermo Scientific imPULSE single use mixer, part# IM00500.6033, stainless steel construction, 500 liter stainless steel bag holding vessel, full hinged side access door with window, jacketed vessel rated 150 psi at 150 f, certified by Cone Craft, serial# H20346-01, national board# 1458, bottom mounted reciprocating mixer drive, side mounted control system with Allen Bradley PanelView Plus touchscreen controller and plc controllers, on stainless steel frame with load, system serial# H20346-01, built 2021.

  • Used Perkin Elmer Paragon 1000 PC FT-IR Spectrometer, benchtop design, serial# 38716.

  • Used Millipore QuickScale 53cm Chromatography Column, serial# QW450-0059, built 2006.

  • Used 48" Walker Transfer Isolator, 316L stainless steel construction, 48" long x 24" wide x 30" high chamber, (2) glove ports, setup for vaporous hydrogen peroxide sterilization, with HEPA filtration and light, 120 volts, serial# BS-30013-1, built 1998.

  • Unused Howorth isolator, 316L stainless steel construction, approximately 9'6" long x 24" deep x 36" high inside chamber, single sided, 6 gloves with side access door, (2) 16" X 29" side access doors, 18" bottom outlet with cover, 4" bottom outlet with cover, CIP spray balls, (2) top mounted internal lights, 1 hp, 230/460 volt blower, on stainless steel stands with control panel, serial# 4344-200, new 2009.

  • Used 1,000 Liter Xcellerex single use bioreactor, model XDR-1000, stainless steel jacketed housing, jacket rated 100 psi at 150 f, bottom mounted agitator drive, project# 8968, serial# 19138, built 2010.

  • Used 250 gallon Befco reactor, stainless steel construction, approximately 42" diameter x 42" straight side, dish lid top with dish bottom (no lifting piston), internal rated 100 psi at 300F, jacket rated 75 psi and full vacuum at 250 F, (2) 4", (3) 2", and (1) .75" nozzles on top, 3" center bottom outlet, on wheels, serial# B10-1259, national board# 287, built 2010.

  • Federal Equipment Company sells biopharma bioreactors used for biochemically active reactions. Our inventory features bench-top fermenters and bioreactors for use in research and development through pilot and scale-up fermentation systems and all the way up to commercial production bioreactors. These fermenters and bioreactors are commonly made from stainless steel or glass. We offer used fermenters and bioreactors made by the top manufacturers like B. Braun, Applikon, Cytiva, ABEC, Thermo Fisher Scientific, Sartorius, Precision, New Brunswick, Pierre Guerin and many others.

  • Eppendorf New Brunswick BioFlo/CelliGen 115 Fermenter Bioreactor, 120 volt, serial# B115FI804092.

  • Used 10 liter New Brunswick fermenter, model BioFlo 3000, 316 stainless steel construction, 8.5" diameter x 14" straight side, flat bolt on top, dish bottom, 14 liter total capacity, 10 liter max working capacity, 3 liter min working capacity, temperature range from 5 C above coolant temp to 80 C, +/- .1 C or +4 C to 80 C, Magmotor agitator drive with two tier six blade paddle agitator, sparger ring, harvest tube, RTD sensor tube, provision for pH and DO monitoring, top mounted jacketed dust filter, 4 baffles, bottom stainless steel water jacket, (5) peristaltic pumps with PLC controls, 120 volt, mfg# m1227-1013, serial# 000787979, built 2000

  • Used 80 liter Pierre Guerin Bioreactor, project# H1M6020, 80 liter working capacity, 128 liter total capacity, " diameter x " straight side, flat bolt on top, dish bottom, rated 4 bar(58 psi)/- 1 bar(-14.5 psi) at 150° c (302° f) internal, rated 6 bar (87 psi) at 150° c (302° f), top mounted 0.25 kw agitator drive, skid mounted packaged system with monitoring system, mass flow meter, filter housing, pump and valving, vessel mfg# H1M602110-2, built 2006.

  • Used 200 liter Sartorius Stedim BioSTAT CultiBag single-bag-use Bioreactor, model STR-200-DW, stainless steel housing, jacketed for 2 bar at -10/+5- c, top mounted servomotor agitator drive, project# BB-8804079, serial# STR-0034, built 2009.

  • Used 200 liter (52 gallon) ABEC fermenter system, 316L stainless steel construction, approximately 24" diameter x 39" straight side, hinged dish top, dish bottom, baffles, rated 40 psi and full vacuum at 400° f internal, jacketed for 60 psi and full vacuum at 400° f, bottom entering agitator drive with, 3 hp, 208-230 volt motor with two tier 6 blade agitator, skid mounted controls, with vfd for agitator, vessel certified by Precision Stainless, serial# 6240, national board# 1267, built 1985.

  • Used 200 liter Sartorius Stedim BioSTAT CultiBag single-bag-use Bioreactor, model STR-200-DW, stainless steel housing, jacketed for 2 bar at -10/+5- c, top mounted servomotor agitator drive, project# BB-8804079, serial# STR-0034, built 2009.

  • Used 300 sq ft BOC Edward freeze dryer, model LYOMAX 28, 316L stainless steel product contact surfaces with (13) 1170 mm wide x 1850 mm deep usable shelves, 115 mm shelf spacing, stoppering, external condensor with 300 kg ice capacity, refrigeration and vacuum skid with liquid natural gas refrigeration, model AV-LUS BOC Edward loading / unloading skid, 480 volt with controls, freeze dryer serial# MTE1930, built 2004.

CONTACT INFORMATION

Federal Equipment Company

8200 Bessemer Avenue

Cleveland, OH 44127

UNITED STATES

Phone: 866-480-1249

Fax: 216-271-5210

NEWS

LAB & BIOPROCESSING EQUIPMENT SURPLUS TO ABEONA THERAPEUTICS

Bioreactors, chromatography systems, centrifuges, TFF systems, ULT freezers & more!

Register by clicking here.

Auction Highlights

Laboratory and bioprocessing equipment surplus to the ongoing operations of Abeona Therapeutics, sold in a timed online auction. Lots are being added, so check the catalog for the current list.

Bioprocessing & Downstream

  • Eppendorf BioFlo 320 bioprocess control systems
  • GE Healthcare AKTA Pure, AKTA Pilot 600, and AKTA Start chromatography systems
  • Spectrum Labs KrosFlo KMPi and KR2i TFF systems
  • Spectrum Labs KrosFlo Research I peristaltic pumps
  • Pall STAX process scale filter chassis
  • Pall Allegro 200 L stainless steel totes

Analytical & Cell Analysis

  • Beckman Coulter Optima AUC analytical ultracentrifuge
  • Beckman Coulter Optima XE-90 ultracentrifuge
  • Beckman Coulter Avanti JXN-26 centrifuge
  • Beckman Coulter Vi-CELL BLU and Vi-CELL MetaFLEX analyzers
  • Molecular Devices SpectraMax i3x microplate reader
  • Bio-Rad CFX96 real-time PCR system
  • Azure Biosystems c600 bioanalytical imaging system
  • Qiagen QIAcube automated sample preparation system

Lab Support & Cold Storage

  • Panasonic and Fisher Scientific ultra-low temperature freezers
  • Panasonic CO2 incubators and Caron environmental chambers
  • Thermo Scientific MaxQ 2000 CO2 Plus shakers
  • Bio-Rad Gel Doc EZ and Trans-Blot Turbo systems
  • BioTek MultiFlo FX microplate dispenser
  • Qsonica Q700 ultrasonic processor
  • & More!

View Our In-Stock Equipment

 

PHARMACEUTICAL PROCESSING, PACKAGING AND LABORATORY EQUIPMENT

Tablet presses, capsule fillers, isolators, fluid bed dryers, metal detectors & more!

Register by clicking here.

Auction Highlights

Pharmaceutical processing, packaging, and laboratory equipment sold in a timed online auction, featuring recognized equipment brands from major American pharmaceutical companies. Located in Cleveland, OH.

Tablet Compression

  • Elizabeth Hata HT-X55LD-U and HT-X65LD-U rotary tablet presses
  • Kikusui Libra 36 station and Virgo 519 KRCZ 19 station tablet presses
  • Manesty Betapress 16 station and Unipress 34 station tablet presses
  • Korsch XL400, Key International SC-2, and Stokes DD2 tablet press tooling

Capsule Filling & Encapsulation

  • Capsugel Xcelodose XD600 micro-dosing capsule filler
  • Bosch DMW700 and GKF700 capsule fillers
  • ACG-Pam AFT Lab and liquid filling encapsulator/bander
  • IMA Zanasi 70F capsule filler

Isolators & Containment

  • Getinge La Calhene half body soft wall isolator
  • 84" Lacalhene isolator and JetPharma LFI-1 isolator
  • Walker transfer isolator glovebox and multi hazard glove box
  • 36" Labconco glove box with antechamber

Granulation, Drying & Coating

  • Glatt GPCG 1 fluid bed dryer granulator
  • O'Hara FBDG 1BT XC Wurster coater, LabCoat, and COMPU-Lab coating pans
  • Vector FL-Multi-5 and Fluid Air FA1 fluid bed dryers
  • Fitzpatrick D6A Fitzmill and Quadro Comil 197AS & U10

Inspection, Detection & QC

  • Natoli LVS 400 laser inspector and Dabrico DI-100 inspection lines
  • Ceia, Goring Kerr, Thermo Ramsey, Safeline, and Eriez metal detectors
  • Mettler Toledo and Sade/CI Electronics multi-lane checkweighers
  • Dr. Schleuniger hardness and friability testers, Agilent 1100 HPLC systems & more!

View Our In-Stock Equipment

 

LATE MODEL PHARMACEUTICAL AUCTION SURPLUS TO PAR HEALTH

Fette Tablet Press, Vial Inspection & Filling Lines, Dabrico Sorting Stations & More - Surplus To The Ongoing Operations of Par Health

November 11-12, 2026

Registration coming soon.

Manufacturing & Packaging Highlights

Solid Dose Manufacturing & Coding Equipment:

  • Fette Compacting 2200i Tablet Press – with operator interface/HMI
  • ATW (Detroit Tool & Engineering) rotary assembly/test machine – Electro Cam PLS 6000 controller
  • ATW (Detroit Tool & Engineering) labeling/filling line section
  • L.B. Bohle lifting/column unit – Type HS300, max load 300 kg
  • Videojet Excel 170i Ultra High Speed printer/coder
  • Web Techniques labeling table/applicator system – Model WT-25LC

Vial/Container Inspection & Packaging Line:

  • Siemens SIMATIC HMI Packaging Line
  • Eisai AIM 288 Operator Inspection Station
  • IMA Life V300 Vial Handling System
  • GNP Seal Force capping/monitoring station

Dabrico Inspection & Sorting System:

  • (11) Dabrico Inc. Inspection/ Sorting stations
  • (2) Dabrico Turntables
  • (2) Dabrico Accumulation Tables
  • (4) Dabrico Feeder Tables
  • Dabrico Table Top Inspection Machine – Model DTI-030
  • (4) SG Optrel PWL Series inspection stations
  • Weiler Labeler VRD-72

Line 300 – Labeling, Case Packing & Coding:

  • Optel LineMaster vision inspection system
  • Weiler Labeler
  • ESS Cartoner VC-30
  • ESS Casepacker CEL 5
  • Videojet Carton Laser Coder
  • (2) Zebra Case Label Printer

View Our In-Stock Equipment

FEATURED ARTICLES

ISOLATORS / CONTAINMENT

  • One (1) Unused Howorth isolator, 316L stainless steel construction, approximately 9'6" long x 24" deep x 36" high inside chamber, single sided, 6 gloves with side access door, (2) 16" X 29" side access doors, 18" bottom outlet with cover, 4" bottom outlet with cover, CIP spray balls, (2) top mounted internal lights, 1 hp, 230/460 volt blower, on stainless steel stands with control panel, serial# 4344-200, new 2009.