Datasheet | December 17, 2009

Datasheet: VHP M1000-T4 Biodecontamination System

Source: STERIS Corporation

For low temperature sterilization of isolators, workstations, aseptic filling lines, rooms, etc. in research, biological safety, and production applications.

 

  • Designed to be integrated with HVAC systems to provide shorter overall biodecontamination cycle for continuous, open-loop applications
  • Select Siemens or Allen-Bradley PLC

 

The VHP cycle operates in an open-loop configuration where the enclosure is subjected to four phases:

  • Dehumidification - Reduction of relative humidity
  • Condition - Rapid increase to desired hydrogen peroxide vapor concentration
  • Biodecontamination* - Maintenance of desired hydrogen peroxide vapor concentration
  • Aeration - Rapid reduction of hydrogen peroxide vapor

 

Cycle times vary with initial temperature and humidity, enclosure type, size and configuration, and load.

The process is fully automated. All cycle parameters are monitored and recorded for process validation.

Products Available for Equipment Operation/Validation

  • Vaprox® 35% Hydrogen Peroxide Sterilant
    • Formulated to provide optimum equipment performance
    • Drum designed for continuous operation
    • Cartridge is specially designed for fast, easy installation
  • VHP Chemical Indicators retain color change for proof of exposure
  • Spordex® VHP Biological Indicators ensure reliable process validation

 

VHP Training, Technical Support and Service

Full operator training is provided either on-site or at a STERIS training facility.

Application Engineers are available to assist with custom cycle development.

Field Service Engineers are available to assist with IQ/OQ/PQ, calibration, start-up, and preventative maintenance.

*When using VHP equipment with Vaprox Hydrogen Peroxide Sterilant in the United States, the term biodecontamination referred to in this document is defined as sterilization of exposed porous and non-porous surfaces in a pre-cleaned, dry, sealed enclosure. Any reference to biodecontamination as it relates to the use of this equipment in the United States does not impart additional claims of effectiveness beyond that approved in the EPA-registered labeling of Vaprox Hydrogen Peroxide Sterilant.

access the Datasheet!

Get unlimited access to:

Trend and Thought Leadership Articles
Case Studies & White Papers
Extensive Product Database
Members-Only Premium Content
Welcome Back! Please Log In to Continue. X

Enter your credentials below to log in. Not yet a member of Bioprocess Online? Subscribe today.

Subscribe to Bioprocess Online X

Please enter your email address and create a password to access the full content, Or log in to your account to continue.

or

Subscribe to Bioprocess Online