VACUBOTTLE & VACUUM-DISPENSE BOTTLE & PUMPS
Source: Inotech Biosystems International
Vacubottle is a continuous liquid aspiration with vacuum, and Vacuum/Pressure Bottle is a continuous liquid aspiration with vacuum; continuous solution delivery via air pressure
Inotech Biosystems Internationalis a continuous liquid aspiration with vacuum, and Vacuum/Pressure Bottle is a continuous liquid aspiration with vacuum; continuous solution delivery via air pressure. Glass bottle – 3L, thick-walled, high clarity, plastic coated glass. (IV-540)
Polyamid Lid - quick (¼-turn) twist-off lid; silicone gasket, two "L" tube fittings with 360° swivel positioning, and steel pressure release valve. (IV-531-A)
Bottle rack - heavy weight steel, bench top or wall mountable, 7"w x 7"d x 5"h (IV-535)
Tubing - thick-walled, flexible silicone, ~2 meters of 3/16" ID & 2 meters of ¼" ID.
Hose connectors – (2x) steel; easy-release for quick hose connect/disconnect from lid fittings;
barbed side for tubing and smooth side for bottle lid fittings. (IV-537) Bottle – 5L, high-density polypropylene; withstands heavy vacuum and
positive pressure up to 25psi for liquid dispensing.
Lid – polypropylene, screw-cap; special EPDM o-ring seal for vacuum or pressure;
two ¼in hose-barb ports; one straight port with pressure-release pop-off cap.
Tubing - thick-walled, flexible silicone, ~2 meters of 3/16" ID & 2 meters of ¼" ID.
Filter – solution filter for dispensing applications; 30um nylon mesh. (IH-186-4)
Rack – heavy steel bottle rack.
Completely autoclavable. Same as IV-830 immediately above, but with 4 liter capacity.
IV-570 Vacuum or Dispense Bottle, 2 Liter
Same as IV-830 above but with 2L capacity and aluminum wire bottle rack. Recommend for working with hazardous liquids.
Two part coupler with liquid seal-off on both sides when separated; 1/4in hose barb on both sides for in-line connection; autoclavable, chemically resistant polypropylene. Blocks unwanted precipitates in delivered solutions; 30um nylon mesh in 1in x 0.5in cartridge; 1/4in hose barbs on both sides for in-hose connection; autoclavable and reusable. 0.1 um hydrophobic, PTFE membrane in plastic housing; 5/16in to 7/16in graduated barbed hose connectors on both sides; place in-hose between vacuum bottle and vacuum pump to protect pump from damaging or hazardous aerosols. Single-head, oil-free, diaphragm pump sized to work with the Inotech Vacuset, Vacubottle, and Pressure Bottles. 1/8hp; 1.1cfm free air flow; vacuum to 24inHg; pressure to 60psi; vacuum & pressure regulators and gages; barbed hose connectors for 3/16in to 5/16in ID tubing; approx. dimensions 8in x 9in x 11in, 11 lbs. Single-head, quite, oil-free piston pump; 1.6 cfm air flow; vacuum to 27.6in Hg; pressure to 40psi; vacuum & pressure gauges and regulator valves; built-in liquid trap on vacuum side; muffler/safety pressure release canister on pressure side; 3/8" barbed hose connectors; approximate dimensions 8in x 9in x 10in; 11 lbs. Inline, air-pressure bleed-valve to allow use of house air systems for liquid dispensing from a pressure bottle via the Vacuset hand-piece. Vacuset hand-piece w/ 8-channel stainless steel tip attachment and stand + Vacuset hand-piece w/ 8-channel ejector tip and stand + two HDPP Bottles (5L or 4L) + IH-260 vacuum/compressor pump + solution filter + aerosol filter. Same as above, but with smaller bottles.
IV-530 Inotech Biosystems InternationalSystem
barbed side for tubing and smooth side for bottle lid fittings. (IV-537)
IV-830 Vacuum or Dispense Bottle, 5 Liter
positive pressure up to 25psi for liquid dispensing.
two ¼in hose-barb ports; one straight port with pressure-release pop-off cap.
IV-550 Vacuum or Dispense Bottle, 4 Liter
IV-570 Vacuum or Dispense Bottle, 2 Liter
IV-534 Quick-disconnect Couplers (2 pack)
IH-186-4 Solution Filter (5 pack)
IV-523 Aerosol Blocking Filters (5 Pack)
IH-260 Vacuum/Compressor pump
IH-265 Vacuum/Compressor Pump 1.6 cfm
IV-700 Air Pressure Bleed Valve
IV-300-5L Vacu-Dispenset Liquid Handling System(5L or 4L bottles)
IV-300-2L Vacu-Dispenset Liquid Handling System(2L or 1L bottles)
<%=company%>, 15713 Crabbs Branch Way, 110 Rockville, MD 20855-2607 Tel: 800-635-4070 Fax: (301) 670-2859
This website uses cookies to ensure you get the best experience on our website. Learn more