Upchurch Scientific^® Tubing Cutters

A flat, 90° burr-free cut is difficult to obtain with most commercial polymer tubing cutters. Upchurch Scientific® Brand tubing cutters were specifically designed to cut PEEK, Teflon®, Tefzel® and other polymer tubing. Our line of polymer tubing cutters includes a standard cutter for 1/16" and 1/8" OD tubing (A-327), and another large bore tubing (A-329). Each has guide holes to ensure precise cutting. These cutters are durable, reliable, and easy to operate. Five replacement blades are included with each cutter.

Our A-350 Cutter is designed to cut capillary-size polymer tubing. The cutter makes clean, perpendicular cuts without collapsing thin capillary walls. A set of ten tubing sleeves, required for cutting, are included with each cutter, along with five replacement blades. The included tubing sleeves are for cutting 360µm OD polymer capillary tubing. Alternative sleeves are available for cutting 510µm and 1/32" OD tubing. All sleeves are 2" long and are made of FEP Teflon. Please note: The A-350 cutter requires a 7/64" Allen wrench to change the blade, such as our M-438-03 wrench.

We also offer SGT precision Shortix™ cutters for fused silica tubing, the FS-315 and FS-400 (built into a genuine Swiss Army Knife). These cutters ensure clean, trouble-free cutting of fused silica tubing, providing better cuts than any other products on the market. They also includes a built-in magnifier to examine the cut tubing ends. Order the FS-315-02 or the FS-400-02 Maintenance Kits, as needed, to replace worn or damaged cutting wheels.

Click here to download the tubing cutters datasheet.
Click here to download the tubing catalog extract.