Product/Service

M-110EH-30 Laboratory Microfluidizer® Processors

The M-110EH-30 has been designed to reliably achieve continuous operating pressures to 30,000 psi. The processor maximizes the energy-per-unit fluid volume, resulting in uniform submicron particle and droplet sizes.

Click Here To Download:
•Product Sheet: M-110EH-30 Laboratory Microfluidizer® Processors

Recommended for:

  • Immiscible Liquid Emulsions
  • Solids-in-Liquid Suspensions
  • Liposomes
  • Cell Disruption
  • Particle Size Reduction for Submicron and Nano-sized particles
  • Deagglomeration
The M-110EH-30 has been designed to reliably achieve continuous operating pressures to 30,000 psi. The processor maximizes the energy-per-unit fluid volume, resulting in uniform submicron particle and droplet sizes.

Utilizing Microfluidics' fixed geometry diamond interaction chamber technology, and a ceramic (Zirconia) plunger, the M-110EH-30 is capable of processing a wide variety of fluids such as simple oil-in-water emulsions, solids-in-liquid suspensions, and cell disruptions, including the most difficult yeasts and plant cells, in 1-2 passes. What's more, the process is repeatable and is guaranteed to scaleup to pilot and/or production volumes.

  • Process pressure to 30,000 psi (2,070 bar)
  • Flow rates to 320 ml/min at 30,000 psi
  • Guaranteed scaleup to pilot and/or production
  • Patented, wear resistant, diamond interaction chamber - no moving parts
  • On-board heat exchanger for consistent discharge product temperature
  • Ceramic (Zirconia) plunger for extended seal life
  • Designed for clean-in-place with no disassembly required
  • Available with steam-in-place (SIP) option
  • Available explosion-proof option
  • CE compliant (Europe)

Click Here To Download:
•Product Sheet: M-110EH-30 Laboratory Microfluidizer® Processors