FINIA® Fill and Finish System- Automate Your Process for Precision

Automate Your Fill and Finish Process

Finia is a functionally closed benchtop system that automates these fill and finish steps:

Note: Finia users must qualify/validate the use of Finia and compliance to GMP within their own manufacturing (or laboratory) environment according to their own standard operating procedures (SOPs)/quality system.

Finia: The First of Its Kind in Automated Fill and Finish

Finia is an automated system that formulates and aliquots fluids, including cell suspensions, to prepare for cryopreservation. It consists of a device, a handheld barcode scanner, a monitor with a touch screen and functionally closed single-use disposable tubing sets.

Reduce Variability in Your Fill and Finish Process^*

• Maintain post-thaw viability greater than 90% for cell products from healthy T-cell donors
• Maintain post-formulation cell viability of greater than 95% of inlet cell viability
• Maintain uniformity of cell concentrations to within 5%
• Maintain final product temperature to within 3 ˚C (± 3 ˚C) of the user-defined target
• Manage Finia with one operator and only 12 minutes of hands-on time per run

Facilitates current Good Manufacturing Practices (cGMP) compliance

• User authentication
• Data capture and reporting
• Workflow configuration and control

Functionally closed

Gamma-sterilized, single-use disposable sets

Optimizes processes

• Custom formulations and dosage ranges from the outset
• Intuitive user interface guides the operator
• Accurate, consistent final product with less than 5% difference in cell concentration between bags

Note: Finia users must qualify/validate the use of Finia and compliance to GMP within their own manufacturing (or laboratory) environment according to their own standard operating procedures (SOPS)/quality system.