F-Series Coriolis Flow And Density Meters

Micro Motion F-Series Coriolis meters are intended for highly accurate mass flow, volume flow, and density measurement in applications that require a compact, drainable design. F-Series meters have a smooth exterior finish that can be kept clean, and all meters can be installed to be self draining. Available in a wide range of construction materials, the F-Series is also available for high temperature, high pressure, and corrosive applications.

Now with Smart Meter Verification, F-Series meters deliver outstanding reliability and ease of use for critical applications. F-Series meters are available with either stainless steel or nickel-alloy wetted parts, allowing you to choose the material that is most copatible with your process fluid. And certain F-Series models are available for high-temperature and high-pressure applications.

The F-Series Flow & Density Meters are compatible with the following transmitter:

• Model 1500/2500 Transmitters
• Model 1700/2700 Transmitters
• Model 2200S Transmitters
• Model 2400S Transmitters
• Series 3000 Transmitters

Features

• Line sizes available:1/4" to 3" (6mm to 80mm)
• 316L stainless steel or nickel alloy materials of construction
• Pressure rating to 2160 psi (148 bar)
• Temperature range -40 to 662°F (-40 to 350°C)
• Liquid mass flow accuracy ± 0.10%; liquid volume flow accuracy ± 0.15%; gas flow accuracy ± 0.50%; liquid density accuracy ± 0.001 g/cm3
• Electronics with MVD™ Technology
• Now available with 2400S Transmitter
• IEC 61508 certified for SIL 2 and SIL 3 to simplify safety systems compliance

Benefits

• Now available with the enhanced core module and Smart Meter Verification for in-situ diagnostics
• Superior sensitivity in a compact design to reduce variability in process control
• Cleanable self-draining design enables fast product change-over
• Low operating frequency for better measurement in continuous two-phase flow and gas applications
• No moving parts to wear or replace minimizes maintenance for long-term reliability